One thing you need to do is to close the water supply You should only need to turn off one of the water supply valves near the faucet to close the water supply, but if not every faucet in your house is required with a water supply valve, You need to turn off the main water supply valve to close the water supply in your house The following are the methods collected by AIDEM Edmund for dealing with water drilling from faucets caused by variable reasons Hope to bring help to friends in need!

1. Press type faucet: Regardless of the appearance of the press type faucet, which it has two handles for hot and cold water or only one handle for controlling hot and cold water together, It operations according to receive basic principles The following is how to disassemble a press type faucet and repair driving problems: What is needed: Use these things to register the press type faucet - a screenriver, soaped in lubricating oil, car suppliers or adjustable wrapping, and the pads to be replaced

Process 1: Close the water supply and remove the small screws on or behind the faucet handle to remove the handle fixed to the faucet body Some screws are hidden under metal buttons, plastic buttons, or plastic sheets that snap or screw into the handle You just need to flip the button open and you will see the handle screw installed at the top If necessary, Use some soaped lubricating oil like WD-40 standard to loose the teams

Process 2: Remove the handle and inspect the components of the faucet Use a large car suppliers or adjustable wrap to remove the packing nut, taking care not to leave scratches on the metal Rotate the valve core or shift in the same direction as when you opened the faucet to unscrew them

Process 3: Remove the scratches that secure the washers If necessary, use saturated lubricating oil to loose the teams Check the scratches and valve core, and replace them with new ones if there are any damages

Process 4: Replace the old game with an identical new one A new game that most matches the old game can generally prevent the faucet from drilling You should also note that the old game has a sliding surface and is still flat, And it should be replaced with the same new game Games that are only designed for cold water will expand violet and block the outlet when there is a hot water flow that has expired, causing the hot water to flow slowly Some games can be operated in hot and cold water, but you have to admit that the games you bulked for replacement are identical to the original ones

Process 5: Fix the new gas onto the valve core, and then install the variable components in the faucet from the beginning Rotate the stainless steel valve core clockwise After the valve core is in place, install the packing nut from the top Be careful not to leave scratches on the metal with the writing

Process 6: Handle the device from scratch and install the button or disc back Turn on the water supply from the beginning and check for any leaks

Article origin: Golden faucethttp://drip-certified.com/