Preparation: Screwdrivers, Polishing fabrics, car suppliers or adjustable wrappers and their replacement pads

Faucet repair process:

Process 1: Close the inlet valve Remove the small screws on or behind the faucet handle to remove the handle fixed to the faucet body Some screws are hidden under metal buttons, plastic buttons, or plastic sheets that snap or screw into the handle Just flip the button open and you will see the handle screw installed at the top If necessary, Use some Penetrating lubricating oil similar to WD-40 standard to loose the teams

Process 2: Remove the handle and check the components of the faucet Use a large car suppliers or adjustable wrap to remove the packing nut, taking care not to leave scratches on the metal Rotate the valve core or shift in the same direction as when you opened the faucet to unscrew them

Process 3: Remove the scratches that secure the washers If necessary, using Penetrating lubricating oil to loose the teams Check the scratches and valve core, and replace them with new ones if there is any damage

Process 4: Replace the old game with an identical new one A new game that most matches the old game can generally prevent the faucet from drilling You should also note that the old game has a sliding surface and is still flat, and it should be replaced with the same new game The gas only related to cold water planning will indirectly expand and block the outlet when hot water flows through, Causing the hot water to flow slowly Some games can be used in both hot and cold water, but you need to determine that the game you purchased for replacement is exactly the same as the original one

Process 5: Fix the new gas onto the valve core, and then install the variable components in the faucet from the beginning Rotate the valve core clockwise After the valve core is in place, install the packing nut from the top Be careful not to leave scratches on the metal with the writing

Process 6: Install the handle from scratch and replace the button or disc Turn on the water supply from the beginning and check if there is any leakage

Article source: Kaiping faucet http://drip-certified.com/