Compared to past faucets, today&# 039; S faucets are even more complex and varied Theoretical, in order to understand the structural diagram and principle of faucets, we need to master and understand the structural diagram of faucets The faucet structural diagram shows us the various components of the faucet, so that we can have a better understanding, otherwise we would&# 039; T even know what&# 039; Inside the faucet

We can see that the structural diagram of the base is still very dense It is a single ceramic valve surface, mainly composed of a handle, valve core, inlet braided pipe, and installation accessories It also includes some sealing rings, screws, and so on

The working principle of ceramic valve core:

In general, the bottom of a ceramic valve core consistency of three holes, with one hole for cold water inlet and outlet, the other for hot water inlet and outlet, and the retaining one for internal water outlet of the valve core

The cold and hot holes of the faucet valve core have sealing rings to ensure that they are in a sealed state with the main enclosed street After connecting the cold and hot water inlet pipes to the main body, ensure that the hot and cold water pipes respond to the two holes of the valve core one by one The valve core main controls the opening and closing status of the two holes, Releasing on the movement of ceramic plates for operation In areas with poor water quality, filter screens can be installed to filter inputs, which can also avoid the potential hard of inputs to ceramic valve cores There are two installation directions for the filter screen: at the water inlet and at the water outlet

Due to the wide variety and classification of faults, the planning of faults varies greatly among different classifications, resulting in completely different fault structure diagrams So we need to first recognize the types of faults Generally, the types of faults we use in daily life include: single joint faults, double joint faults, and triple joint faults Recording to the different han LE S, They can also be divided into single handle faucets and double handle faucets These different faucets have significant differences in the faucet structure diagram, so we need to categorize them before understanding the relevant faucet structure diagram Let&# 039; Take the bathtub faucet as an example for a brief explanation

Bathhub faucet

Bathhub faucet uses S placement to allow water to enter, but it still needs to enter the valve core first, And then flow into the main body from the valve core Water enters the water hole on the left side of the communicator and passes through it to receive the function of opening and closing the water flow The communicator operations with the main body through the sealing ring to receive the function of switching between the internal bubble and the show channel of the main body Note that in the comm On Tator we see, the centerline should be symmetrical, otherwise there may be water leakage

Article origin: Golden faucet http://drip-certified.com/