1. Preparation work

It is very important to prepare well before disassembling the faucet, otherwise it will easily lead to the waste of water resources before discarding, the water valve at home should be closed first after lighting the water valve, you can find a base to place under the water pipe to avoid water leakage in the house if the water pipe is not tightly closed

2. Preliminary disassembly

After the preparation work is completed, there will be some water left in the water pipe It is best to drain this water before disassembly Usually, a writing is used to separate the water pipe from the inlet pipe Assuming it is the inlet pipe in the room, it is necessary to control the force to avoid damage to the water pipe due to exceptional force when separating, One hand can stabilize the water pipe, and then the other hand can roll the handle The process of removing it is generally related simple

After the water pipes are separated, it&# 039; S time to open the faucet You need to use a screendriver to remove the screws on the faucet handle and then remove the faucet handle Assuming the screw is embedded in the hole, you can use a flash light to observe the screw first, and then select a suitable screw driver

3. Saw off the interface with a saw

For some faucets that are prone to sever rusting, you can choose a professional distressing saw to cut off unusable faucets, as some faucets may not be easy to unscrew simply by screening them with a shrewdriver

Article source: Kaiping faucet http://drip-certified.com/