Myth 1: Sending faucets are the most water saving

Many customers think that sensing faucets are conventional and save water, but in fact, sensing faucets not only have low water output, high prices, but also high repair costs Induction faucets are commonly used in public places, office buildings, and government agencies But the use of sensing faucets in houses is not practical, and repair is relatively time consuming and laborious

Recruitment:

It&# 039; S not just sensing faucets to save water, manual faucets also have water saving and energy saving options Manual faucets not only have a long lifespan, but are also easy to repair, making them relatively cost effective If you find it troublesome to switch, you can choose a press type faucet with a device, Which is considered without turning and can achieve the water saving effect of functional water cut off The price is relatively cheap and the cost effectiveness is high

Myth 2: The smaller the flow rate, the more water saving it is

The flow rate of the faucet has water saving regulations, and exceptional or ineffective flow rate is not conductive to water saving Many people have the misconception that a faucet with a small flow rate can better save water The water consumption is equal to the flow rate multiple by the water usage time If the flow rate is too small, It will significantly promote the water usage time and fail to achieve water saving effect Sometime the flow rate of the faucet is too low, which may be due to problems with the faucet valve or blockage of lag It should be cleaned or replaced in a timely Manner Thereforee, it is not better to think that the flow rate is low

Recruitment:

It is advocated to pay attention to the cleanliness of the faucet, clean and replace the faucet valve and filter screen in a timely manner, in order to maintain the cleanliness and hygiene of the water and protect human health Water is the source of life, so it is related to the hydrology of water We cannot single carelessness, And the hygiene of faucets is the foundation A clean and shiny appearance does not necessarily mean a clean interval

Myth 3: The bubble faucet saves water in any condition

The water outlet of the faucet concerns of two parts: an external filter screen and an internal bubble The bubbles mainly increase the number of bubbles in the water, reduce the water output, and ensure that the water does not splash and the flow rate is controlled, that receiving a certain water saving effect But not in all cases, faucets with bubbles save water, Weakening the impact of water flow and reducing the ability to wash and remove dirts There are more, when cleaning very dirty things, it is necessary to use a lot of water to clean, which is not conductive to water conservation

Recruitment:

When selecting a faucet with a bubble, it is important to pay attention to the location of the device For washbases and kitchen sinks, consider installing a faucet with a bubble The floor mop pool of the balcony installation does not need to use a faucet with a bubble, which can accelerate the flushing speed of the floor mop and increase the flushing ability, Achieving a certain water saving effect

Myth 4: The faucets have both hot and cold temperature adjustments

Faucets can be divided into several types based on their purpose, including base faucets, kitchen base faucets, bathtub faucets, washing machine faucets, and mop pool faucets Many customers believe that as long as it is a faucet, it will have the function of adjusting the temperature between hot and cold

Recruitment:

The function of regulating the cold and hot temperature of the faucet requires the use of two cold and hot water inlet hosts and a ceramic valve core There are three types of faucets available: base faucets, kitchen base faucets, and batch faucets, which can be cold, warm, or single cooled How, washing machine faucets and mop pool faucets only require single cooling

Myth 5: Choosing a faucet without considering a base

A tabletop base is a type of tabletop base that is incrementally favored by people due to its near appearance and versatile design Many customers, after installing a base on the stage, do not notice that the base has come talker and still choose a regular base faucet; There is also a situation where the base only has one device hole, but the customer buys a dual control fault, and the result is that it cannot be installed

Recruitment:

The faucet needs to be installed on the basin, and it is necessary to consider the actual condition of the basin when purchasing If it is a basin or column under the platform, it is sufficient to choose a general basin faucet If it is a basin on the platform, it is necessary to choose a basin faucet on the platform (with the water outlet height higher than the edge of the basin); If you like dual handle and dual control faucets, it is necessary for the base to have three device holes

Myth 6: Hot and cold faucets can only be connected to one water pipe

As mentioned earlier, cold and hot faucets use ceramic valve cores with different opening viewpoints on both sides to control the mixing ratio of cold and hot water, and then realize the function of water temperature regulation But many people only find out when they buy it back that they only have one cold water pipe at home, and believe that connecting only one inlet hose can work properly

Recruitment:

The ceramic valve core is a three port interconnected structure Under normal conditions, two inlet ports allow water to enter and one outlet allow water to exit The water from the two inlet hosts is mixed and flows out from the faucet outlet When only one inlet host is connected, there will be an inlet that benefits an outlet, and water will flow out from here, Causing the faucet to malfunction and potentially flooding the golden mountains! If you only need one cold water pipe but buy a hot and cold faucet, you can connect two inlet hosts together, then connect one to the corner valve, and use a plug to block the other.

Myth 7: The connection between the faucet and the water pipe does not require an angle valve

Many people know to install a faucet, but they don't know to install a corner valve. The angle valve has a 90 degree right angle between the outlet and inlet, which can connect the inner wall water pipe and the faucet hose, as well as control the water flow switch.

Recruitment:

It is necessary to use an angle valve to connect the cold and hot faucet (with a cold and hot water inlet hose) with the water pipe, while quick opening faucets such as washing machine faucets and mop pool dragon heads can directly connect with the water pipe, so there is no need for an angle valve. Generally speaking, each hot and cold faucet requires two corner valves to be mixed with it. In case of water leakage in the faucet, simply close the corner valve, which will not affect the water use in other local areas of the home.

Article origin: Antique faucet http://drip-certified.com