Improve maintenance after selecting a faucet can affect its lifespan, which is a header for many people The frequency of using a faucet is high, and it is necessary to use it every day Under such a high frequency of use, how can we maintain the faucet and increase its service life? In fact, this is not a replicated task Below, we will teach you how to install, use, and maintain the faucet correctly As long as the faucet is properly installed, used, and maintained, the actual service life of the faucet can not only be extended, but also be maintained as bright as new

When the air temperature is below 0 degrees Celsius, if the handle of the faucet feelings normal, it must be soaped with hot water until the handle feelings normal before use Otherwise, it will affect the service life of the faucet valve core

2. After the faucet is closed, there will be drilling phenomenon, which is because

It is a normal phenomenon caused by residual water in the inner chamber of the faucet If there is a drilling condition for more than ten minutes in the long term, it is considered a water leak, indicating that the product has a quality issue

3. Due to the presence of trace amounts of carbon in water, scale can form on the surface of the metal and cause correction on the surface of the faucet, affecting its cleanliness and service life So after using the faucet, It is necessary to frequently use a soft cotton cloth or spring to wire the surface of the faucet with neutral soap water (note: do not use corrosive or acidic substances to wire), and then dry the surface with a soft cloth Avoiding using metal wire balls or cleaning cloths with hard particles

4. Do not use excessive force to turn on or off the faucet, simply roll it generously with the flow Even traditional faucets do not require significant effects to right Especially, do not use the handle as a manual to support or use it. Many people tend to turn off the faucet tightly after using it, which is not advisory Not only does it not prevent water leakage, But it can also cause damage to the sealing valve, resulting in the faucet not being tightly closed

5. When the water flow increases, inputs should be removed If a decrease in water output is found under a water pressure of no less than 0.02 MPa, it is possible that the faucet is blocked The solution is to use a wrench to generously unclaw the water ZZLE screen cover at the outlet of the faucet, clean the inputs, and then carefully install it. Generally, you can recover as manual

Origin of the article: Kaiping faucet http://drip-certified.com/