1. Remove the kitchen faucet

a. The interface is trusted and it is difficult to remove the faucet from the bathroom when disassembling, at least the connection at the inlet pipe is simple and easy to separate How, where it is the water inlet connection or the connection between the faucet and the countertop in the kitchen, both connections are replicated to unscrew

b. Saw off the faucet above the counter top with a saw Although oil dripped on the interface and heated it vigorously, 720 seconds later, the interface retained motionless, so we have to continue using the saw to forcibly open it. The kitchen counter is not like the bathroom counter and cannot be removed There are more, the faucet part above the counter can only be seen off first, So that the faucet is separated from the countertop

c. Using a saw to separate the water inlet pipe and hose, as there was no problem with the water inlet hole and hose being unable to be separated when using the bathroom furniture equipment, it would be difficult to connect the saw water inlet hole to a new hose if it were cut directly After rendering for a long time, I still followed the hardware store owner&# 039; S supply and processing plan He thought that if he could&# 039; T scratch it off with all his right, he just needed to cut it off

2. Equipment kitchen faucet

a. Install an inlet pipe connector After the inlet pipe connector is rejected, take the cut off part to the hardware store and have the store owner provide a matching connector Then apply adhesive and connect the interface to the inlet pipe

b. Assemble and fix the dragon - after the glue between the inlet pipe interface and the inlet pipe has been solidified, the faucet can be installed Assemble the kitchen faucet in sequence, secure the faucet to the counter top, and then secure the host to the inlet port. At this point, the kitchen faucet equipment is complete

Article source: Kaiping faucet http://drip-certified.com/