The valve core is one of the primary components used for controlling fluid systems such as faucets and valves Today, the editor will introduce the effect and identification method of the faucet valve core

Effect of faucet valve core

The valve core is a valve component that uses its movement to complete the basic functions of directional control, pressure control, or flow control The switch control of any failure requires a valve core As for failures, the quality of the valve core is the primary basis for evaluating the quality of all failures, And it can be said that the most critical factor affecting the quality of the failure is the valve core Common failure valve cores including steel ball valve cores and ceramic valve cores The steel ball valve core has excellent resistance to pressure, but its advantage is that the rubber sealing ring that serves as a sealing effect is prone to wear and aging Compared with the steel ball valve core, The ceramic valve core is more heat resistant and wear resistant Along with the excellent sealing function of the ceramic valve core itself, it can achieve high resistance to opening times and will not cause water noise leakage due to valve core wear The faucet with a ceramic valve core has a more comfortable and smooth feel, and can be opened and closed flexibly

There are three common types of valve cores: stainless steel ball valves, ceramic disc valve cores, and axial rolling valve cores. The common feature of these three types of valve cores is their integrity, with all core shafts integrated and easy to install for repair and replacement

Identification method for faucet valve core

1: Turn on and off the faucet handle, touch it with your hand, and check if there is any obstruction halfway up and down the switch! (Blocked indicators poor performance)

2: Turn the valve core switch half way and stop Then hit the mark again! Compare the tactic sensing between the upper and lower halves to see if they feel the same! (Only slightly high end valve cores can achieve this)

3: When the valve core dominates (regulations cold and hot)! (Using the above method first) Then look at the weight A good valve core controls the time when it is "idle", which means it feels very light!

4: Gently grip the handle of the faucet with your index and middle fingers and move it up and down to see if it is flexible and not loose, has a blocking feel, and has an oil pumping feel If it is flexible and not loose, has a non blocking feel, and has a heavy oil pumping feel, you can buy it!

Article source: Kaiping faucet http://drip-certified.com