Kitchen failures are relatively simple and have problems Some may not be replaced due to prolonged use, while others may require replacement due to poor maintenance How, in both cases, you need to master some skills to replace failures, and also need to know some knowledge about maintaining failures to enrich your knowledge Next, let&# 039; S talk about how to replace the kitchen faucet with the editor? Kitchen faucet repair tips?

How do I change the faucet in the kitchen?

1. Remove the kitchen faucet

a. The interface is trusted and it is difficult to remove the faucet from the bathroom when disassembling, at least the connection at the inlet pipe is simple and easy to separate How, where it is the water inlet connection or the connection between the faucet and the countertop in the kitchen, both connections are replicated to unscrew

b. Saw off the faucet above the counter top with a saw Although oil dripped on the interface and tightened it vigorously, 720 seconds later, the interface retained motionless, so we have to continue to use the saw to forcefully open it. The kitchen counter top is not like the bathroom counter top and cannot be removed, so the faucet part over the counter top can only be seen off firm st, So that the faucet is separated from the counter top

c. Using a saw to separate the inlet pipe and host, as there was no problem with the inability to separate the inlet hole and host when using the bathroom faucet equipment, it would be difficult to connect the saw inlet hole to a new host if the saw was cut directly After rendering for a long time, I still followed the hardware store owner&# 039; S supply and processing plan He believes that if it cannot be unscrewed with dead force, then only the method of saving off is needed

2. Equipment kitchen faucet

a. Install an inlet pipe connector After the inlet pipe connector is rejected, take the cut off part to the hardware store and have the store owner provide a matching connector Then apply adhesive and connect the interface to the inlet pipe

b. Assemble and fix the dragon - after the glue between the inlet pipe interface and the inlet pipe condenses, the faucet can be installed Assemble the kitchen faucet in sequence, secure the faucet to the counter top, and then secure the host to the inlet port. At this point, the kitchen faucet equipment is complete

Kitchen faucet repair tips?

1. Remove the handle and inspect the components of the faucet Use a large car suppliers or adjustable wrap to remove the packing nut, taking care not to leave scratches on the metal Rotate the valve core or shift in the same direction as when you opened the faucet to unscrew them

2. Remove the screws that secure the washers If necessary, using Penetrating lubricating oil to expose the teams Check the scratches and valve core, and replace them with new ones if there is any damage

3. Close the water supply and remove the small scratches on or behind the faucet handle to remove the handle fixed to the faucet body Some scratches are hidden under metal buttons, plastic buttons, or plastic sheets that snap or scratch into the handle You just need to flip the button open

4. Regardless of the appearance of the press type faucet, where it has two handles for hot and cold water or only one handle that controls both, it operations according to receive basic principles The following is how to disassemble a press type faucet and repair driving problems: What is needed: Use these things to register the press type faucet - a shrewdriver, polishing lubricant, Car suppliers or adjustable wrapping, and the pads to be replaced

Okay, how about changing the kitchen faucet? Kitchen faucet repair tips? The editor has already analyzed the issue with us. We hope you can have a reference when your fault is broken, handle some daily troubles, and provide you with more methods and skills We hope it can help you

Article origin: Golden faucet http://drip-certified.com