Part 1: Introduction to faucet replacement

1. Replacement of bathroom faucet

I don&# 039; T know what the landlord thinks Previously, the room was equipped with faults that were more common in the kitchen and had higher outputs, compared to base faults This allocation looks very awkward, but since it can be used normally, it has never been replaced And this time there are already doubles, so we must not be able to replace this type of fault

This is the appearance of the bathroom with a new faucet, and it immediately looks high end, atmospheric, and upscale The faucet replaced in the bathroom this time was observed by my room for free from my brother It is rubbed that the market price is seasonal hong yuan, but now it does&# 039; T cost me a penny I really want to laugh when I sleep And this faucet is a specialized faucet for washbasins, with low water output It is mainly used for cleaning and washing clothes, and is suitable for equipment in rooms

But when you think about it, such high end faucet equipment fees a bit unworthy for faucets in our low end bathroom This faucet is a cold and warm faucet, and our bathroom only requires a cold water inlet, so the hot water connection hose of the faucet is wasted Thereforee, it is also important to remind everyone that when choosing, You need to choose a suitable faucet based on your own waterway situation

In addition, there is a small question that the host of the faucet is not long, so I still well to the hardware store to replace it with a longer host Here is a reminder to everyone that when choosing a faucet, it is best to estimate the length of the host in advantage, In order to prevent the problem of not connecting the faucet host that cannot be purchased due to insufficient length h h h h h h

2. Kitchen faucet replacement

The previous equipment in the kitchen was a common see single hole faucet, and the color style was also matched with the stainless steel sink There is no question, I do not want to replace it. If the faucet leaks, the problem can be solved by correcting the faucet itself But considering that the faucet has been used for many years, it is still better to replace it directly

The new faucet in the kitchen has a similar style to the old faucet, which is suitable for use in the kitchen The water outlet is longer and higher, and larger items such as pots and pans can also be wasted in the pool

Attachment: Water faucet purchase tips

There are a wide variety of faucets in the market, which can make people feel at a loss when choosing Choosing a suitable and Excel faucet is very helpful for future preservation, and we can also refer to the feed trips in the table above when making the purchase

Part 2: The replacement equipment for faucets is not simple

Although I lake internship experience, at least I am also the editor of the decoration channel I have seen workers&# 039; Equipment and faucets when I repeat well to the construction site And before replacing the faucet, the editor also did some home work, so he is determined about the equipment How, in the process of equipment development, different situations are all that can cause fusion

1. Refer to faucet equipment

When I was running to the construction site, I followed the construction workers and look pictures of their equipment failures Although it was the first time the new house was equipped, the equipment process can still be learned Below is the process of the master&# 039; Equipment faucet

1. Connect the host to the faucet

First, extend the faucet host into the faucet equipment port and tight it by hand Try pulling to see if the connection is sturdy Then fix the other fasteners that need to be assembled before fitting to the faucet

2. Fixed faucet

Then pass the assembled faucet host through the basin, connect the fitting parts, and tight them with Teams, etc. Pay attention to debugging during the period to see if the faucet is properly connected to the basin and if there is any loss

3. Connecting the water inlet

After fixing the faucet and basin, place the basin in the fixed position and connect the other end of the host to the inlet pipe interface When receiving, assimilating there are hot and cold water, remember that the left side is hot water and the right side is cold water So the equipment is basically finished

2. Actual situation of faucet replacement

At the beginning, what the editor was thinking was that replacing the faucet would involve an additional process of removing the old faucet compared to the equipment on top It felt very simple and Took two to ten minutes to complete

Unexpectedly, I accounted for a big question in the process of "demand" due to the age of the equipment, the faucet pipeline has been rusted and cannot be unscrewed after being twisted for a long time After all, replacing the two faucets of the equipment tool more than two hours For more information on how the editor ultimately manages the equipment, please continue to read on

Part 3: Replacement Method for Bathroom Faucet

The editor specifically likes the faucet installed on the bathroom basin, so in order to see its equipment function listener So when it comes to the question of who should install the kitchen faucet or bathroom faucet first, the editor resolved to choose the bathroom faucet first Let&# 039; Take a look at the entire process of replacing the equipment bathroom faucet

1. Close the inlet valve

Before replacing the faucet, the editor first closes the inlet valve The inlet valve is located under the kitchen counter top How, according to the editor&# 039; Understandably, assessing that the valve is not tightly closed or cannot be closed, it can work with water How, when using the equipment, the new faucet should be prepared in advance by using a raw material tape to wrap around the thread direction for 7-8 turns (with a slim leak of water), and a large bucket of water should be prepared below the water pipe to prevent spill ge; In addition, when the valve cannot be closed, it is necessary to open a new faucet and prepare for pressure reduction by diverting water from other faucets.

2、 Remove the bathroom faucet

1. Separate the water inlet pipe and hose

The first step is to use a wrench to separate the water inlet pipe and hose. The water inlet pipe in the bathroom is an exposed pipe that can be swung by hand, so you may break it accidentally when opening it. So when disassembling, the editor was particularly careful, holding the water pipe with his left hand and twisting the wrench with his right hand to easily separate the two.

2. Separate faucet and basin

Step 2, remove the fixing parts of the faucet and allow the faucet to be removed from the basin. But then questions arose. The hose of the faucet has become brittle due to its long use, and the fixing part has now rusted, making it impossible to unscrew it with a wrench.

3. Saw off the interface with a saw

Due to the limited space under the basin, it is difficult to operate. Moreover, the glass adhesive between the basin and the countertop has long been ineffective, so the basin can be easily removed from the countertop. After removing the basin, the construction will not trip hands or feet. Then, using a saw to cut off some of the rusty parts that were difficult to remove, the faucet was successfully removed.

3、 Equipment bathroom faucet

1. Assemble and fix the faucet

Firstly, extend the hose into the interior of the faucet and connect it. Then connect the screw rod to the faucet interface, place the rubber ring on the faucet, and then extend the faucet into the basin, adding a rubber pad and gasket. Fix the screws with a wrench after all.

2. Replace the hose and add a plug

Due to the fact that the faucet is a hot and cold faucet, and the internal water valve is a three-way, only one water inlet is needed, so only one hose can be connected. And the other hose needs to be connected to the faucet, but the other end needs to be blocked by some means. The editor consulted the hardware store owner and recommended using a wire plug to seal it. In addition, as mentioned earlier, the hose for the faucet only needs 50 centimeters, while the actual demand is around 60 centimeters. Therefore, a matching 60 centimeter hose was selected at the hardware store, wrapped around a raw material belt, and connected.

At this point, the bathroom faucet has been disassembled and the equipment is completed, leaving behind some cleaning and gluing work.

Part 4: Kitchen faucet replacement method

I live on the eighth floor without an elevator. In order to install the faucet in the bathroom, I ran up and down three times in a short time. I bought a hand saw for the first time, a hose for the second time, and a wire plug for the third time. I thought it would be easier to replace the kitchen faucet, but I went to the hardware store again.

1、 Remove the kitchen faucet

1. The interface is rusty and difficult to remove

When disassembling the faucet in the bathroom, at least the connection at the inlet pipe is very simple. However, whether it is the water inlet connection or the connection between the faucet and the countertop in the kitchen, both connections are difficult to unscrew.

2. Saw off the faucet above the countertop with a saw

Although oil dripped on the interface and tightened it vigorously, after more than ten minutes, the interface remained motionless, so we had to continue to use a saw to forcefully open it. The kitchen countertop is not like a bathroom countertop and cannot be removed, so you can only cut off some of the faucets above the countertop first, so that the faucets are separate from the countertop.

3. Use a saw to separate the water inlet pipe and hose

Since there was no question that the inlet hole and hose could not be separated when using the bathroom faucet equipment, it would be a bit difficult to connect the sawn inlet hole to a new hose if we were to directly cut it. After pondering for a long time, I still followed the solution provided by the hardware store owner. He believes that if it cannot be unscrewed with dead force, then only the method of sawing off is needed.

2、 Equipment kitchen faucet

1. Equipped with water inlet pipe interface

After the inlet pipe joint was rejected, some of the cut parts were taken to the hardware store and the store owner was asked to provide a matching interface. Then apply adhesive and connect the interface to the inlet pipe.

2. Assemble and fix the faucet properly

After the glue between the inlet pipe interface and the inlet pipe condenses, the faucet can be installed. Assemble the kitchen faucet in sequence, secure the faucet to the countertop, and then secure the hose to the inlet port. At this point, the kitchen faucet equipment is complete.

Article source: Kaiping faucet http://drip-certified.com/