When in use, the water flow of the faucet benefits small and small at first glance, the filter at the faucet south is blocked, but after turning on the faucet south and organizing it, it shows a leakage situation The most common place for this situation is the faucet in the kitchen and bathroom stainless steel faucet manufacturers introduce that which it is a kitchen or bathroom faucet, These problems come common over a long period of use

When the faucet is blocked, the stainless steel faucet factory will teach you how to handle it:

1. Water quality issues, such as closing of faults caused by inputs such as sand and trust in the water You can unscrew the water outlet of the fault for inspection and drain the water with the filter head removed Assuming the water flow returns to normal, it indicates that the problem is with the filter screen Then quietly tap the removed faucet filter screen in the pool, And large solid inputs such as sand will naturally fall Remember not to use your hands to pick it, as it may push the sand into the filter and get stuck To ensure proper cleaning, the filter screen and gas inside can be removed and flushed The stacks in the center of the filter hole can also be manipulated with a need for After cleaning everything, Install it from the beginning You can learn from sustainless steel faucet manufacturers like these, and many times if you Wholesale faucets, you can practice under sustainless steel faucet manufacturers

2. There is another situation introduced by the maintainless steel faucet manufacturer, assigning it is caused by a large foreign object This situation is relatively rare, but it is also feasible to account for it. There before, I will also slightly mention it. In fact, it is very simple, just prepare a write to open the faucet Use a write to open the interface under the basin In Fact, Most faucets can be turned open with strong hand pressure to remove the faucet Of course, the filter head in the front section also needs to be removed and placed as Invert the faucet and fill it with a bottom of clean water Assuming that the water flowing out from the back is not smooth, It indicates that there is a foreign object inside the faucet tube It can also be wasted underwater to ensure proper cleaning Then you can reinstall it again Again Be careful to check if the connection is tight during reinstallation to avoid water leakage

Article source: Kaiping faucet http://drip-certified.com/