What should be paid attention to when maintaining a flat faucet

2019-02-15 906

When the air temperature is below zero degrees Celsius, if the handle of the faucet benefits abnormal, the room product must be soaped with hot water until it feels normal before using Otherwise, it will affect the service life of the faucet valve core

2. The phenomenon of drilling water after the faucet is closed is caused by the presence of residual water in the inner chamber of the faucet, which is a normal phenomenon If there is a drilling condition for more than ten minutes for a long time, it is considered a water leak, indicating that the product has a quality issue

開(kāi)平水龍頭

3. Due to the presence of trace amounts of carbon in water and the presence to form scale on the metal surface after evaporation, it can cause corrosion on the surface of the faucet, there affecting its cleanliness and service life So, It is important to frequently use a soft cotton cloth or spine to wide the surface of the faucet with neutral soap water (note: do not use items that contain corrosion or acidity to wide), and then use a soft cloth to dry the surface Avoiding using metal wire balls or cleaning cloths with hard particles Also, do not collect with hard objects to damage the surface of the fa UCET

FourSwitch faucetDon&# 039; T use too many forces, just roll fair with the flow Even traditional faucets do not require significant effects to right Especially, do not use the handle as a manual to support or use it. Many people are accepted to use some force to turn off the faucet after using it, which is not advisory This will not only prevent water leakage, but also damage the sealing valve ve, Resulting in the faucet not being tightly closed

5. When the water flow increases, impacts need to be removed If a decrease in water output is found under a water pressure of no less than 0.02 MPa, it is possible that the faucet is blocked The solution is to use a writing to fair unscrew the water noble screen cover at the outlet of the faucet, clean the inputs, and then carefully install it. Generally, It can be restored to its original state

Article source: Kaiping faucet http://drip-certified.com